Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV

Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV
Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV
Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV
Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV
Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV
Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV

Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV
TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING This unit has been reset to the factory default settings. (1) - ARISTA 7050S-64 ETHERNET 48-PORT 4SFP NETWORK SWITCH. (44) - CURVATURE SFP-10G-SR-ARISTA-CURV TRANSCEIVER. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item.

Aboot 2.0.10-1458058 Press Control-C now to enter Aboot shell Booting flash:/EOS-4.12.7.1. Swi [6.583395] Starting new kernel Data in /mnt/flash/EOS-4.12.7.1. Swi differs from previous boot image on /mnt/fla sh.

Saving new boot image to /mnt/flash... Switching rootfs Welcome to Arista Networks EOS 4.12.7.1 Mounting filesystems: [OK] Starting udev: [OK] Setting hostname localhost: [OK] Entering non-interactive startup Starting EOS initialization stage 1: [OK] ip6tables: Applying firewall rules: [OK] iptables: Applying firewall rules: [OK] iptables: Loading additional modules: nf_conntrack_tftp [OK] Starting system logger: [OK] Starting NorCal initialization: [OK] Retrigger failed udev events[OK] Starting mcelog daemon Starting EOS initialization stage 2: [OK] Starting ProcMgr: [OK] Starting Power On Self Test (POST): [OK] Starting sshd: [OK] Starting crond: [OK] Completing EOS initialization (press ESC to skip): [OK] Model: DCS-7050S-64 Serial Number: JPE15110120 System RAM: 4017108 kB Flash Memory size: 1.5G No startup-config was found. The device is in Zero Touch Provisioning mode and is attempting to download the startup-config from a remote system. The device will not be fully functional until either a valid startup-config is downloaded from a remote system or Zero Touch Provisioning is cancelled.

To cancel Zero Touch Provisioning, login as admin and type'zerotouch cancel' at the CLI. Alternatively, to disable Zero Touch Provisioning permanently, type'zerotouch disable' at the CLI.

Note: The device will reload when these commands are issued. The system is going down for reboot NOW! Flushing AAA accounting queue: [OK] Stopping sshd: [OK] watchdog is not running Restarting system..

[210.251100] SysRq : Remount R/O... Swi [7.598644] Starting new kernel Switching rootfs Welcome to Arista Networks EOS 4.12.7.1 Mounting filesystems: [OK] Starting udev: [OK] Setting hostname localhost: [OK] Entering non-interactive startup Starting EOS initialization stage 1: [OK] ip6tables: Applying firewall rules: [OK] iptables: Applying firewall rules: [OK] iptables: Loading additional modules: nf_conntrack_tftp [OK] Starting system logger: [OK] Starting NorCal initialization: [OK] Retrigger failed udev events[OK] Starting mcelog daemon Starting EOS initialization stage 2: [OK] Starting ProcMgr: [OK] Starting Power On Self Test (POST): [OK] Starting sshd: [OK] Starting crond: [OK] Completing EOS initialization (press ESC to skip): [OK] Model: DCS-7050S-64 Serial Number: JPE15110120 System RAM: 4017108 kB Flash Memory size: 1.5G localhost login: admin localhost>.
Arista 7050S-64 Ethernet 48-Port 4SFP Network Switch with44SFP-10G-SR-ARISTA-CURV