Juniper EX2200-C EX2200-C-12P-2G 12-Port Gigabit Ethernet PoE Network Switch

TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING Unit powers on and lights up. The unit has been reset to the factory default settings.

The unit has scuffs and scratches on the exterior. They do not affect the functionality of the unit. (1) - JUNIPER EX2200-C EX2200-C-12P-2G 12-PORT GIGABIT ETHERNET POE NETWORK SWITCH. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. U-Boot 1.1.6 (Apr 4 2013 - 10:33:10) Board: EX2200-C-12P-2G 4.12 EPLD: Version 14 (0x00) DRAM: Initializing (512MB) Flash: 8 MB Firmware Version:01.00.00 USB: scanning bus for devices...

3 USB Device(s) found scanning bus for storage devices... Conf /kernel text=0x847481 data=0x41b34+0xdd8bc syms=[0x4+0xf1130+0x4+0xc8be4] Hit [Enter] to boot immediately, or space bar for command prompt. CPU: Feroceon 88FR131 rev 1 (Marvell core) cpu53: Feroceon 88FR131 revision WB enabled EABT branch prediction enabled 16KB/32B 4-way Instruction cache 16KB/32B 4-way write-back-locking-C Data cache real memory = 536870912 (512 MB) avail memory = 503205888 (479 MB) SOC: Marvell 88F6281 rev A0, TClock 200MHz Security policy loaded: Junos MAC/veriexec (mac_veriexec) MAC/veriexec fingerprint module loaded: SHA256 MAC/veriexec fingerprint module loaded: SHA1 ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES properties...

At mem 0xf1020200-0xf102023b on m bus0 timer0. At mem 0xf1020300-0xf102032f irq 1 on mbus0 gpio0. At mem 0xf1010100-0xf101011f irq 35, 36,37,38,39,40,41 on mbus0 uart0. At mem 0xf1012000-0xf101201f irq 33 on mbus0 uart0: console (9600, n, 8,1) uart1.

At mem 0xf1012100-0xf101211f irq 34 on mbus0 ehci0. At mem 0xf1072000-0xf1073fff irq 12, 13,14,11,46 on mbus0 mge0: hardware MAC address 54:4b:8c:e4:24:bf miibus0. On miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto i2c0.

At mem 0xf1011000-0xf101101f irq 29 on mbus0 syspld0. At mem 0xf1010600-0xf101062f, 0xf8000000-0xf87fffff irq 2 3 on mbus0 mpfe0. At mem 0xf4000000-0xf7ffffff irq 113 on mbus0 pcib0.

At mem 0xf1040000-0xf1041ff f, 0xe8000000-0xefffffff irq 9 on mbus0 pci0. On pcib0 Initializing product: 119.. Bmeb: bmeb_lib_init done 0xc338a800, addr 0xc1d6132c bme0:Virtual BME driver initializing Timecounter "CPU Timer" frequency 200000000 Hz quality 1000 ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0.

Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Kernel thread "wkupdaemon" (pid 42) exited prematurely. Trying to mount root from ufs:/dev/da0s2a Attaching /packages/jbase via /dev/mdctl... Mounted jbase package on /dev/md0... Verified manifest signed by PackageProduction_12_3_0 Verified jboot signed by PackageProduction_12_3_0 Verified jbase-ex-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted fips-mode-arm package on /dev/md1...

Verified manifest signed by PackageProduction_12_3_0 Verified fips-mode-arm-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted jcrypto-ex package on /dev/md2... Verified manifest signed by PackageProduction_12_3_0 Verified jcrypto-ex-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted jdocs-ex package on /dev/md3...

Verified manifest signed by PackageProduction_12_3_0 Verified jdocs-ex-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted jkernel-ex-2200 package on /dev/md4... Verified manifest signed by PackageProduction_12_3_0 Verified jkernel-ex-2200-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted jpfe-ex22x package on /dev/md5... Verified manifest signed by PackageProduction_12_3_0 Verified jpfe-ex22x-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted jroute-ex package on /dev/md6... Verified manifest signed by PackageProduction_12_3_0 Verified jroute-ex-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted jswitch-ex package on /dev/md7... Verified manifest signed by PackageProduction_12_3_0 Verified jswitch-ex-12.3R12-S12 signed by PackageProduction_12_3_0 Mounted jweb-ex package on /dev/md8... Verified manifest signed by PackageProduction_12_3_0 Verified jweb-ex-12.3R12-S12 signed by PackageProduction_12_3_0 Executing /packages/mnt/jweb-ex-12.3R12-S12/mount. Media check on da0 on ex platforms /dev/da0s2a Last Mounted on /instrootmnt Root file system Phase 1 - Check Blocks and Sizes Phase 2 - Check Pathnames Phase 3 - Check Connectivity Phase 4 - Check Reference Counts Phase 5 - Check Cyl groups 1535 files, 57400 used, 36762 free (18 frags, 4593 blocks, 0.0% fragmentation) /dev/da0s3e Last Mounted on /var Phase 1 - Check Blocks and Sizes Phase 2 - Check Pathnames Phase 3 - Check Connectivity Phase 4 - Check Reference Counts Phase 5 - Check Cyl groups SUMMARY INFORMATION BAD SALVAGE? Yes BLK(S) MISSING IN BIT MAPS SALVAGE? Yes 909 files, 1478 used, 61424 free (400 frags, 7628 blocks, 0.6% fragmentation) FILE SYSTEM MARKED CLEAN FILE SYSTEM WAS MODIFIED Computing slice and partition sizes for /dev/da0...

Savecore: could not be determined No dump exists /dev/da0s3d Last Mounted on /var/tmp Phase 1 - Check Blocks and Sizes Phase 2 - Check Pathnames Phase 3 - Check Connectivity Phase 4 - Check Reference Counts Phase 5 - Check Cyl groups 11 files, 15 used, 188899 free (19 frags, 23610 blocks, 0.0% fragmentation) FILE SYSTEM MARKED CLEAN /dev/da0s4d Last Mounted on /config Phase 1 - Check Blocks and Sizes Phase 2 - Check Pathnames Phase 3 - Check Connectivity Phase 4 - Check Reference Counts Phase 5 - Check Cyl groups 17 files, 20 used, 31646 free (38 frags, 3951 blocks, 0.1% fragmentation) FILE SYSTEM MARKED CLEAN rm: /var/etc/pam. Conf: Operation not permitted Creating initial configuration... Mgd: Running FIPS Self-tests veriexec: no signatures for device. File='/sbin/kats/cannot-exec' fsid=69 fileid =51404 gen=1 uid=0 pid=463 mgd: FIPS Self-tests Passed mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO.

Initial interface configuration: additional daemons. Module_path: /boot//kernel;/boot/modules -> /boo t/modules;/modules/peertype;/modules/ifpfe_drv;/modules/platform;/modules; kld netpfe drv: ifpfed_eth ifpfed_ml_cmnkld platform: ex_ifpfeLoading the EX-ser ies platform NETPFE module if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere gr at_arp_on_ifup=YES: net.

Grat_arp_on_ifup: 1 -> 1 ipsec kld. Setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initialize /var subdirs starting local daemons:set cores for group access.

Fri Dec 28 15:16:08 UTC 2018 Boot media /dev/da0 has dual root support WARNING: JUNOS versions running on dual partitions are not same /dev/da0s1a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 36250 free (18 frags, 4529 blocks, 0.0% fragmentation) Amnesiac (ttyu0) login: root Logging to master. ALERT:Auto-image upgrade will start. This can terminate config CLI sess ion(s). Modified configuration will be lost. To stop Auto-image, in CLI do the following:'edit; delete chassis auto-image-upgrade; commit'.