The multicast filter will block PROFINET PTCP-Delay traffic. Factoryline switches with standard functions can be used for quick and cost-effective Ethernet network expansion to the field level.The narrow housing design makes them suitable for universal remote use in control cabinets and junction boxes. PN switches have a unique multicast filter that blocks PROFINET PTCP-Delay traffic. The switch independently learns the addresses of termination devices connected to a port by evaluating the source addresses in the data.
Only packets with unknown addresses, with a source address of this port or with a multicast/broadcast address in the destination address field are forwarded via the corresponding port. Up to 2048 MAC addresses can be stored. In cases of heavy traffic, packets with an 802.1Q priority level between 4 and 7 or with an IPv4 Type of Service Precedence value of one or more are considered high priority and are processed before packets with an 802.1Q priority level between 0 and 3 or an IPv4 Type of Service Precedence value of 0. The multicast filter will block PROFINET PTCP-Delay traffic by filtering frames with the destination MAC address in the range 01-80-C2-00-00-02 through 01-80-C2-00-00-0F.Note that the filter blocks LLDP traffic because PTCP-Delay uses the same MAC address (01-80-C2-00-00-0E). Low cost, low complexity security (optional) elements are available to restrict access or tampering. Power connection is via a removable COMBICON connector. US is +24 V DC and GND is 0 V DC.
FE is via a separate screw. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\PLCs & HMIs\PLC Peripheral Modules\PLC Ethernet & Communication". The seller is "lsautomation" and is located in this country: US. This item can be shipped to United States.