Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB

Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB
Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB
Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB
Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB
Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB
Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB

Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB
Internet / Ethernet 16 Channel Relay Board. This is kit of IP controler and card with 16 SPDT relays.

It is for home automation, hobby and commercial projects. It allows you controlling electrical devices via LAN/WAN (Internet). Just connect the device into your local network and control it from another computer or android smartphone over the LAN or Internet.

We can provide also software examples for developers. Now with free Android and iOS mobile App! 10 Mb Ethernet interface with Link/Activity Led. (No protection against overvoltage and inverse polarity). RAS-12-15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC) - single relay channel schematic.

8 analog inputs with 10 bit resolution (0-3.3VDC). 16 (2x8) bit configurable digital I/O port (0-3.3VDC) - in this kit they are reserved for the relay board. Dimensions: Relay PCB - 85mm / 300mm / 20mm; DAEnetIP2 - 43mm / 55mm / 15mm. Standart protocols: ARP, IP, ICMP (ping), DHCP.

Supports snmp v1 (snmpset, snmpget, snmptrap), HTTP (integrated web server with autorization) , TFTP (for firmware upgrade). Ports for SNMP (161) and HTTP (80) can be changed. Reset of the relays on incoming/outgoing ping timeout.

Function "load outputs(relays) states from EEPROM on boot". It can send traps according analog ADC level. Analog Inputs may be referred to control the relay according their level. Possibility of connection analog sensors to the analog inputs as LM34DZ, LM35DZ, LM335, MCP9700A.

Relay PCB parameters: FR4 / 1.5mm / two layers / metallized holes / HAL / white stamp / solder mask / Extra PCB openings for better voltage isolation / Doubled PCB tracks for better voltage isolation. DAE-iModules - FREE iOS mobile app. DAE-aModules - FREE Android mobile app. 3rd parity software: Command line utility - netsnmp.

Android software (by iSwitch LLC, not free but inexpensive). Security and fire alarm systems.

Manual or automatic device restart if event occur. 1 x IP controller (DAEnetIP2).

1 x 16 SPDT Relay Board (Relay type - RAS-12-15) - 12VDC. DRM Software - Denkovi Relay Manager Software. CD is not included in the package but the software is available for download from this link. How to connect inductive loads.

Port JP3 (P3) - the relay board is connected here. Port JP4 (P5) - the relay board is connected here. "Free" the pin is free and defined for the user. "XXXXXX" - the pin is reserved. "In" - the pin is input.

"I/O" digital input or output depending the settings. "Out" - the pin is output. Note that the relay board is connected to JP3(P3) and JP4(P5) digital outputs ports.

All the DAEnetIP2 I/O ports does not have any protection against overvoltage or reversed polarity. For inputs, if the input voltage exceed 3.3V, the controller may be damaged. If you have questions how to use the I/O ports please contact with us or take a look into the manual.

Here are the steps (instructions) how to power on and connect the device directly to your computer see this image. For router LAN connection see this image. Or Internet connection, please see in the user manual. Connect the DAEnetIP2 controller with your computer via UTP crossover cable. (note that the device does not support AUTO MDIX).

The flat ribbon cable connector must be fitted into to DAEnetIP2 IDC in this way. Connect each "In" labeled wire into the referred screw terminal of the relay board. For example "In 1" wire goes into Relay 1 In screw terminal, "In 2" wire goes into Relay 2 screw terminal and so on. Connect the GND wire of the flat ribbon cable into the GND screw terminal of the relay board. Connect supply jack to DAEnetIP2.

You will have to find suitable power supply adaptor. DAEnetIP2 minimal supply voltage is 7.5 VDC. The maximal voltage is 25 VDC. It is recommended the supply voltage to be 12 VDC.

DAEnetIP2 doesn't have any protection against inverted supply voltage, so be careful. The middle pin of the power terminal is + Vcc (Center positive tip polarity). Connect the power wires to the relay board as it is shown on the image right to the text. It is possible to supply the DAEnetIP2 controller and relay board either with single either with 2 separate power supply sources.

Now you can power on the whole kit (for example plug the supply adaptor into the electricity network). In case of success you have to see this when you power on the kit the link led (top) is blinking and the bottom led by default shows the power on and it is constantly on.

Check if the relay board power led is on constantly. The kit in working condition. Open your LAN card network settings and save them, because next step is to change them.

Your initial computer IP should be in the device network range. So it is recommend to be 172.16.100.1. Mask 255.255.0.0.

Gateway 172.16.100.1. There is lot of info in the net how to do it for example a good link is this one. The controller has default settings, in case the access is lost. There are several steps for loading the default settings. Turn off the power supply of the IP controller.

Move the jumper from position 1 to position 2. Turn on the power supply of the IP controller. Move the jumper from position 2 to position 1.

0.0.0.0 (disabled). Restart on incoming ping timeout. Restart on remote IP timeout. Reset I/O ports on restart.

Analog Events Low, High, Acc. The video bellow shows how you can control DAEnetIP2 based device - SNMP 8 Relay Board LM35DZ.

Any other Denkovi Ethernet Device from this list. Can be acessed with same success from your iOS device via DAE-iModules. Some useful information about DAE-iModules/DAE-aModules and DAEnetIP2. You must be sure the IP, UDP Port and SNMP community are correct, otherwise it won't enter into the device. DAEnetIP2 Manager is configuration utility for Denkovi DAEnetIP2 devices. Access many DAEnetIP2 controllers at a time.

Support most of the DAEnetIP2 OIDs. Configurating each P3/P5 I/O line separately as input or output. Linearization (scaling) for the Analog Inputs (displaying the analog inputs values in human reading values - volts, meters degrees). Thresholds can be converted automaticaly from human units into divisions.

For more information about DAEnetIP2 Manager, screen-shots and detailed description and downloads - here. Download the last version (install package) - DAEnetIP2Manager.

Download the last version (install archive) - DAEnetIP2Manager. Denkovi Relay Manager (DRM) is multiplatform software for easy controlling all kinds of Denkovi relay boards (USB, SNMP, TCP/IP).

Using of Denkovi Relay Manager (DRM) Software with devices which are not manufactured by Denkovi Assembly Electronics LTD is not allowed! The item is supported by DRM Software. It allows you to switch ON/OFF your devices at particular date and time, turn ON/OFF the relays with pulses or control them via specific sequence. If you have ordered at least one of our relay boards from this list. You may turn your PC in powerful automation tool.

Multiplatform software: supported by Windows/Linux ver. Control up to 32 relay boards.

Control mode: single and multiple setting of the relays. Single pulse with adjustable delay from the control mode ver. Timer mode: create timer playlist for the relays. Weekly mode: each relay may be turned ON/OFF on each day of the week.

Calendar mode: each relay may be turned ON/OFF on particular date at particular time. Pulse mode: each relay may work in pulse mode by setting duration for ON and duration for OFF. Adjustable number of pulses ver. Each relay from each relay board can work independently in some of the five modes.

Each relay board and each relay can be named by the user. Auto load function - the last working file is loaded when DRM is started. Auto connect function - when the relay board is disconnected DRM will keep trying to find and when this is done, the relay board will be connected again. Auto start function - DRM software starts when the OS starts (currently this is not supported by Windows 8 and Linux).

Auto set function - DRM will set the relays automatically when the relay board is connected. Possibility of DRM to starts when PC boots and continues to work from the last saved point. For more information about DRM Software, screen-shots and detailed description and download - here. DRM Software image - control mode for Internet / Ethernet 16 Channel Relay Board. Demo video with DRM Software and Internet / Ethernet 16 Channel Relay Board.

Just write the IP address of the controller in the address bar and you will see the page, which is integrated in the controller (it has small built in server). The default username/password are admin/admin. DAEnetIP2 can send traps if some analog input changes its level bellow/above some threshold (Low/High). The same logic can be used for setting one of the digital outputs port - JP5 according analog input port JP6. Steps for Install net-snmp library in Windows. In this way you will be able to control the ethernet controller with command line. The file must look like net-snmp-X. The packet will be install in c:\usr by default. Download the DAEnetIP2 MIB file from here. Copy the mib file here c:\usr\share\snmp\mibs. Add new line in the file c:\usr\etc\snmp\snmp. Conf with the "mibs all" directive. Now you can test different commands for OID access, supported by this module. Their names you may see in the DAEnetIP2. For most Linux OS, there is built in the same snmp tool in the kernel. You can also create batch/bash files for setting the outputs for example. If you don't know how - please contact with us. For developers - we can provide examples and support for the following platforms. SNMP definitions file (MIB file) - here. Configuration utility - DAEnetIP2 Manager (Windows/Linux) - DAEnetIP2Manager. The firmware file with the current actual version for DAEnetIP2 - here.

Connecting sensors to DAEnetIP2 - here. Mobile app for iOS mobile devices, support link here. Mobile app for Android mobile devices, support link here. DAEnetIP Burner software for firmware upgrade - here. Instructions how to upgrade the firmware - see in the manual or here.

Please contact with us for download. Android application for mobile devices by iSwitch LLC, Android market link - here.

Net-snmp command line tool for windows (instructions how to install - see in the manual) and C++ library - here. Cloud home automation software by the company EdelBit. It supports all our ethernet relays. Additional explanation how to use the software with our ethernet relays.

DAEnetIP2 + 2 ch relay board kit. DAEnetIP2 + 8 ch relay board kit. DAEnetIP2 8 ch relay module for temperature measurement.

The item "Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB" is in sale since Wednesday, April 27, 2011. This item is in the category "Informatica\Networking e server enterprise\Altro enterprise networking". The seller is "leotron_87" and is located in Bqla, Ruse.

This item can be shipped worldwide.


Scheda Internet / Ethernet 16 Canali Relè SNMP, WEB